Choose & mix

Best Hair Color for Gray Coverage: Pro Lines Compared

Updated November 17, 2026 · SleekShop hair color guide

For full gray coverage you need a permanent color, mixed with the developer the brand specifies (usually 20 volume) and left on for the full time. Most pro lines also have a "natural" or "extra coverage" series made for gray. You use it on its own, or you mix it into a fashion shade. If you only want to soften gray rather than hide it, a demi-permanent gloss blends it instead (see the last section).

Before you color: follow the directions in the package. Wella and Redken call for a skin allergy test 48 hours before every color service, and the FDA says to do a skin test every time before you dye your hair. Never use hair dye on eyebrows or eyelashes.

Gray coverage compared: the pro lines we sell

Every number below comes from the brand's own instructions. Use the developer from the same brand.

Gray coverage by pro line: shades, developer, mix and time
Line Type Shades made for gray Brand's gray claim Developer for gray Mix Time
Wella Koleston Perfect ME+ Permanent Pure Naturals (/0); intense naturals (e.g. 77/0) for hard-to-cover gray Up to 100% 6% (20 vol) Welloxon Perfect 1:1 30–40 min; don't go past 40 min on gray
Goldwell Topchic Permanent N, NA (cool), NN ("extra", for resistant gray) Up to 100% 6% (20 vol) System Cream Developer Lotion 1:1 30 min (20 min with heat)
Goldwell Topchic Zero Permanent, ammonia-free N, NN, NA naturals Up to 100% 6% (20 vol) System Cream Developer Lotion 1:1 30 min (20 min with heat)
Matrix SoColor Extra Coverage Permanent The whole Extra Coverage collection (N, NA, M and more, 500-series codes) Up to 100%; made for more than 50% gray 20 vol Matrix Cream Developer 1:1 30–45 min
Schwarzkopf Igora Royal Absolutes Permanent Every Absolutes shade (the 0 in the code is the natural tone for white coverage) 100% 9% (30 vol) for up to 90% white; 6% (20 vol) for over 90% white 1:1 Igora Royal Oil Developer 30–45 min
Schwarzkopf Igora Zero AMM Permanent, ammonia-free Natural (-0, -06) and Natural Extra (-00) Up to 100% (fashion shades up to 50% on their own) 6% (20 vol) for Natural; 6% or 9% for Natural Extra 1:1 30–45 min
L'Oréal INOA Permanent, ammonia-free Natural and Gold Natural shades; Extra Coverage Natural for deeper coverage Up to 100% INOA Rich Developer (10, 20 or 30 vol) 1:1 35 min (30 min on a first service on white hair, per L'Oréal)
Joico LumiShine YouthLock Permanent All YouthLock shades (NN and NNA) 100% on 25% to 100% gray 20 vol LumiShine Developer 1:1 35–45 min
Redken Color Gels Oils Permanent liquid, ammonia-free Every shade Up to 100% on every shade Redken Pro-Oxide, 10–40 vol 1:1 20–45 min, no heat

Swipe for more

Each brand writes its own claim ("up to 100%") and tests it its own way. We haven't found an independent test that ranks these lines against each other, so there's no single "best". In practice, the line that works is the one whose instructions you follow exactly.

Back to the list

How much natural shade to add, by percentage of gray

Fashion shades (ash, gold, red, violet and so on) carry less of the natural base that hides gray. That's why most brands tell you to mix a natural shade into a fashion shade once there's a fair amount of gray. Use a natural at the same level as your fashion shade.

How much natural shade to add, by percentage of gray
% gray Wella Koleston Perfect ME+ Goldwell Topchic and Topchic Zero (per 40 ml developer) L'Oréal INOA Igora Zero AMM fashion shades
Up to 30% Brand gives no add-in below 30% 15 ml N/NA/NN + 25 ml fashion Target shade on its own (up to 70%) Up to 50% on their own
30–50% Add ⅓ of a Pure Naturals shade 20 ml natural + 20 ml fashion (30–60%) Target shade on its own Up to 50% on their own
50–70% Add ½ of a Pure Naturals shade 20 ml + 20 ml up to 60%; 25 ml natural + 15 ml fashion from 60% Target shade on its own Mix 2 parts fashion shade with 1 part Natural shade for up to 100%
70–100% Add ½ of a Pure Naturals shade 25 ml natural + 15 ml fashion ½ tube target + ½ tube Natural (cool targets) or Gold Natural (warm targets) Same mix: 2 parts fashion to 1 part Natural

Wella's worked example for 30–50% gray is 15 g 7/0 (Pure Naturals) + 45 g 7/75 (fashion) + 60 g 6% Welloxon Perfect. In other words, the "⅓" is 1 part natural to 3 parts fashion. Wella doesn't give a gram example for the ½ band, so follow the leaflet in the box.

Matrix uses level, not an add-in: with SoColor Extra Coverage, pick one level lighter than the result you want if you have less than 50% gray, and the level you want if you have 50% gray or more. Matrix says Extra Coverage can be mixed with its Blended and Reflect shades, but that doing so changes the coverage you get.

Joico says the YouthLock shades cover 100% at 25%, 50% and 75–100% gray with 20 vol, so no add-in is needed. They can be mixed with other LumiShine permanent shades.

Back to the list

Tips for stubborn gray at the temples and hairline

  • Use the brand's resistant-gray shade. That means Goldwell NN, Wella's intense naturals (xx/0), Igora Zero AMM Natural Extra (-00), INOA Extra Coverage Natural or Matrix Extra Coverage.
  • Keep to 20 vol unless the brand says otherwise. Most lines cover gray with 6% (20 vol). Igora Royal Absolutes is different: Schwarzkopf's instructions use 9% (30 vol) for coverage up to 90% white hair and keep 6% (20 vol) for hair that's over 90% white.
  • Process for the full time. Matrix's chart gives 30–45 minutes for Extra Coverage, and Joico says 35–45 minutes for gray. Wella caps Koleston at 40 minutes on gray.
  • Apply to the regrowth first. Schwarzkopf says to apply Absolutes to dry, unwashed hair, only on the regrowth, in fine sections.
  • Strand test first if you're switching lines or covering gray for the first time.

Not sure how much to buy? Our how much hair color do I need guide covers that question.

Back to the list

Gray blending vs full coverage

Full coverage uses permanent color. It hides the gray completely, but it grows out as a visible root line.

Blending uses a demi-permanent color or gloss. It softens gray into the rest of your hair, so the regrowth is less obvious, and it fades over time. Demis don't lighten hair.

Demi-permanent lines for blending gray
Line What the brand says about gray Notes
Redken Shades EQ Gloss Blends gray; add an NB shade in proportion to your gray Up to 25% gray: ½ oz NB + 1½ oz shade; 25–50%: 1 oz + 1 oz; 50–75%: 1½ oz + ½ oz; 75–100%: 1¾ oz + ¼ oz. Mix with 2 oz Processing Solution. 20 min, up to 40 min for gray. No lift
Wella Color Touch / Color Touch Plus Up to 70% gray coverage with Color Touch Plus Color Touch is ammonia-free; Color Touch Plus is low-ammonia. Wella says it fades over 28 washes. Mix 1:2 with Color Touch Emulsion 1.9% or 4%
Schwarzkopf Igora Vibrance Up to 50% blending; up to 70% with Natural Extra shades Schwarzkopf says it lasts up to 25 washes, with 15–20 min development
Goldwell Colorance Cover Plus Natural gray blending (Goldwell gives up to 75% on its US page) Mix 1 part color to 2 parts Goldwell 3% cream lotion, per Goldwell's directions

Blending is a good fit if you're under about half gray, if you're growing out to your natural gray, or if you want softer regrowth. For full coverage on heavy gray, the permanent lines in the first table are what the brands recommend.

Shop all gray coverage hair color or demi-permanent color. For developers, see Developer & Peroxide.

Back to the list

Products in this guide

Stock checked November 17, 2026.

Questions people ask

What is the best professional hair color for gray coverage?

For heavy or stubborn gray, choose a permanent line's gray series. That means Goldwell Topchic NN, Wella Koleston Pure Naturals, Matrix SoColor Extra Coverage, Igora Royal Absolutes, INOA naturals or Joico LumiShine YouthLock. Each brand claims up to 100% coverage when it's used with its own developer and full timing. No independent ranking exists, so pick a line and follow its instructions exactly.

Should I add a natural shade when covering gray with a fashion shade?

Usually, yes. Wella says to add ⅓ of a Pure Naturals shade at 30–50% gray (its example is 15 g 7/0 with 45 g of the fashion shade) and ½ at 50–100%. Goldwell scales from 15 ml up to 25 ml of N, NA or NN per 40 ml of developer as gray increases. INOA adds a half tube of Natural or Gold Natural above 70% white hair.

What developer covers gray best?

Most lines specify 6% (20 vol), including Wella, Goldwell, Matrix Extra Coverage, Joico YouthLock and Igora Zero AMM naturals. Igora Royal Absolutes is the exception: Schwarzkopf uses 9% (30 vol) for coverage up to 90% white hair. Use the developer from the same brand as your color.

Does Shades EQ cover gray?

It blends gray rather than fully covering it, and it won't lighten. Redken says to add an NB shade in proportion to your gray (for example, half NB for 25–50% gray) and allows up to 40 minutes on gray hair.

Why won't the gray at my temples take color?

Resistant gray often needs the brand's extra-coverage shade, the full processing time and the right developer. Section the regrowth finely and apply there first. If it still won't cover, a strand test or a colorist can help you find the cause.

All hair color guides

Sources