Choose & mix

Developer Volumes and Mixing Ratios for Every Pro Color Line

Updated November 17, 2026 · SleekShop hair color guide

Developer is the hydrogen peroxide cream or lotion you mix with hair color. Its "volume" tells you its strength: 10 volume is 3%, 20 volume is 6%, 30 volume is 9% and 40 volume is 12%. Higher volumes lift (lighten) more. Each color line also has its own mixing ratio, its own named developer and its own processing time, so always check the line before you mix. The table below lists all three for every pro line we sell, taken from each brand's own instructions.

Before you color: follow the directions in the package exactly. Do a skin allergy test before every use: the FDA says to do one every time before you dye your hair, and many brands, including Wella, Redken, Goldwell, Matrix and L'Oréal Professionnel, call for it 48 hours before coloring. Wear gloves, time the color with a clock or timer, and never use hair color on eyebrows or eyelashes.

What do 10, 20, 30 and 40 volume mean?

"Volume" is the older way of writing the peroxide strength. The percentage is the same thing in different units.

Developer volumes, peroxide strength and general use
Volume Peroxide What it's generally used for
5–6 vol 1.5–1.9% Deposit only: toning, glossing, demi-permanent color
10 vol 3% Deposit with little or no lift; going darker or staying the same level
20 vol 6% The standard for gray coverage; about 1–2 levels of lift
30 vol 9% About 2–3 levels of lift
40 vol 12% About 3–4 levels of lift, mainly with high-lift shades

The exact lift depends on the line. Brands don't all promise the same lift from the same volume:

Lift by developer volume, per color line
Volume Wella Koleston Perfect Goldwell Topchic Matrix SoColor Schwarzkopf Igora Royal L'Oréal INOA
10 vol / 3% Same depth or darker Darker than natural Up to 1 level Darker; deposit Up to 1 level
20 vol / 6% 1 level; gray coverage Same level or 1 lighter; up to 100% gray Up to 2 levels; gray 1–2 levels Up to 2 levels; white coverage
30 vol / 9% 2 levels (3 with Special Blonde) 2 levels Up to 3 levels 2–3 levels Up to 3 levels (INOA's maximum)
40 vol / 12% 3 levels (4–5 with Special Blonde) 3 levels Up to 4 levels 3–5 levels with high-lift shades Not used with INOA

Swipe for more

Two things to remember:

  • Color doesn't lift color. Developer lifts your natural pigment. It won't lighten hair that's already been dyed, so 30 or 40 volume over old box dye won't take you to blonde.
  • For gray coverage, most brands want 20 volume (6%). Going higher usually trades coverage for lift.

Back to the list

Mixing ratios and the right developer, line by line

Every row below comes from the brand's own instructions. "Ratio" is always color : developer, by weight or volume.

Wella

Wella: mixing ratio, developer and time
Line Ratio Developer to use Processing time Shop the developer
Koleston Perfect ME+ (Pure Naturals, Rich Naturals, Deep Browns, Vibrant Reds) 1:1 (for example 60 g color + 60 g developer) Welloxon Perfect creme developer, 10/20/30/40 vol 30–40 min; 15–25 min with heat Welloxon Perfect
Koleston Perfect Special Blonde (12/) 1:2 (60 g + 120 g) Welloxon Perfect 9% or 12% 50–60 min; 25–35 min with heat Welloxon Perfect
Koleston Perfect pastel toning 1:2 Welloxon Perfect Pastel 1.9% (6 vol) 5–15 min on pre-lightened hair Welloxon Perfect Pastel 1.9%
Color Charm Permanent Cream 1:2 (pour 2 parts developer, then 1 part color) Color Charm Creme Developer 30 min, up to 45 min for depth or gray Color Charm Creme Developer
Color Charm Permanent Liquid 1:2 (Wella: one whole bottle + 3 oz developer) Color Charm developer (Creme or Clear) 30–45 min Color Charm Creme Developer · Color Charm Clear Developer
Color Charm Liquid High Lift (12-series) 1:2 Color Charm Clear Developer; 40 vol for up to 4 levels 30–45 min Color Charm Clear Developer
Color Charm Gel (tube) 1:2 Color Charm developer 30 min, up to 45 min for depth or gray Color Charm Creme Developer
Color Charm Permanent Liquid Toners (T18, T14, T11, T10…) 1:2 Color Charm 20 vol developer Up to 30 min, on towel-dried pre-lightened hair Color Charm Creme Developer
Color Charm Permanent Creme Toners 1:2 Color Charm 10 vol creme developer 10–20 min Color Charm Creme Developer
Color Touch (demi-permanent) 1:2 Color Touch Emulsion 1.9% (6 vol) or 4% (13 vol) 20 min; 15 min with heat Color Touch Intensive Emulsion

Wella has replaced the gel with Color Charm Permanent Cream; check the insert if you still have gel tubes. Wella says it "cannot guarantee accurate results with the use of any other developers" for Koleston Perfect. Color Touch 1.9% is for the same depth or darker, toning and soft gray blending. 4% gives more vibrancy and stronger gray blending.

Redken

Redken: mixing ratio, developer and time
Line Ratio Developer to use Processing time Shop the developer
Shades EQ Gloss and Shades EQ Bonder Inside (demi-permanent, no lift) 1:1 Only Shades EQ Processing Solution (or Gloss-to-Gel Processing Solution) 20 min on dry hair; up to 40 min for gray Shades EQ Processing Solution

Redken says no other developer can be substituted. Regular 10-volume cream developer is not a replacement. Full details are in our Shades EQ shade chart.

Goldwell

Goldwell: mixing ratio, developer and time
Line Ratio Developer to use Processing time Shop the developer
Topchic, 2–10 series 1:1 Goldwell System Cream Developer Lotion, 3/6/9/12% 30 min; 20 min with heat System Cream Developer Lotion
Topchic Special Lift (11 and 12 series) 1:2 System Cream Developer Lotion 9% or 12% 45 min; 30 min with heat (Goldwell's Open Air system) System Cream Developer Lotion

Goldwell says perfect performance is guaranteed only when Topchic and Goldwell's developer lotion are used together. Full details are in our Topchic shade chart.

Matrix

Matrix: mixing ratio, developer and time
Line Ratio Developer to use Processing time Shop the developer
SoColor Pre-Bonded (Blended, Reflect, DreamAge, HD) 1:1 Matrix Cream Developer, 10/20/30/40 vol 30–45 min; the full 45 min when lifting more than 1 level or covering gray Matrix Cream Developer
SoColor Extra Coverage 1:1 Matrix Cream Developer 20 vol only 30–45 min Matrix Cream Developer
SoColor Ultra Blonde (UL) 1:2 Matrix Cream Developer 30 vol (most neutralizing) or 40 vol (most lift) 50 min Matrix Cream Developer
SoColor Sync Pre-Bonded (demi-permanent) 1:1 Matrix Cream Developer 10 vol Up to 20 min Matrix Cream Developer

L'Oréal Professionnel

L'Oréal Professionnel: mixing ratio, developer and time
Line Ratio Developer to use Processing time Shop the developer
INOA (ammonia-free permanent) 1:1 (one 60 g tube + 60 g developer) INOA developer (sold as INOA Rich Developer), 10/20/30 vol; 30 vol is the maximum 35 min INOA Rich Developer
Majirel 1:1.5 (one 1.7 oz tube + 2.6 oz developer) Majicrème developer, 20/30/40 vol 35 min Majicrème Developer
Majirel High Lift 1:2 (1.7 oz + 3.4 oz) Majicrème 30 vol (up to 3 levels) or 40 vol (up to 4½ levels) 50 min Majicrème Developer

Schwarzkopf Professional

Schwarzkopf Professional: mixing ratio, developer and time
Line Ratio Developer to use Processing time Shop the developer
Igora Royal (Naturals, Fashion, Absolutes, Highlifts 10-series) 1:1 Igora Royal Oil Developer 3/6/9% (Highlifts 10-series 9–12%) 30–45 min Igora Royal Developer · Igora Royal Oil Developer 6% (2 oz)
Igora Royal Highlifts 12-series 1:2 Igora Royal Oil Developer 12% 30–45 min Igora Royal Developer
Igora Royal Absolutes 1:1 (60 ml + 60 ml) 9%; 6% for pure deposit on more than 90% white 30–45 min; Schwarzkopf says heat isn't needed or recommended Igora Royal Developer
Igora Vibrance (demi-permanent) 1:1 Igora Vibrance Activator Gel 1.9% (6 vol), or Activator Lotion 1.9% (6 vol) or 4% (13 vol) 5–20 min (full head 10–20 min) Activator Gel 1.9% · Activator Lotion 1.9% · Activator Lotion 4%

Schwarzkopf says Igora Royal Fashion Lights are mixed with 9% or 12% and are for use off the scalp only. If you add a booster or additive to an Igora Royal formula, add the same amount of extra developer to keep the ratio (for example 60 ml color + 9 ml additive + 69 ml developer).

Joico

Joico: mixing ratio, developer and time
Line Ratio Developer to use Processing time Shop the developer
LumiShine Permanent Creme 1:1 LumiShine Creme Developer 5/10/20/30/40 vol 35 min; up to 45 min for gray (no heat) LumiShine Creme Developer
LumiShine YouthLock 1:1 LumiShine 20 vol (6%) 35–45 min LumiShine Creme Developer
LumiShine Lumi10 (10-minute permanent) 1:1 Lumi10 Accelerator 22 vol (6.6%) only; Joico says not to use another developer volume 10 min, timed from the end of application; no heat Lumi10 Accelerator
LumiShine Demi-Permanent Liquid and Demi Creme 1:1 LumiShine 5 vol (1.5%) Creme Developer 5–35 min, depending on the result LumiShine 5 Vol Developer
Vero K-PAK Color (permanent) 1:1 Vero K-PAK Color Veroxide 10/20/30/40 vol 10 vol 25–35 min; 20 vol 35–45 min; 30 vol 45–55 min; 40 vol 55–65 min Veroxide
Vero K-PAK High Lift and Ultra High-Lift 1:2 Veroxide 40 vol only 45–60 min (60 for maximum lift) Veroxide

Joico's Veroxide guide: 10 vol for deposit or ½–1 level, 20 vol for gray and 1–2 levels, 30 vol for 2–3 levels, 40 vol for 3–4 levels.

Pravana

Pravana: mixing ratio, developer and time
Line Ratio Developer to use Processing time Shop the developer
ChromaSilk Permanent Creme 1:1½ Pravana Creme Developer 10/20/30/40 vol 10 or 20 vol: 30 min. 30 or 40 vol: 45 min, no heat. Gray: 20 vol, 45 min Pravana Creme Developer
ChromaSilk HI LIFTS 1:1½ 30 or 40 vol Up to 45 min, no heat Pravana Creme Developer
ChromaSilk Express Tones 1:1½ Pravana Zero Lift Creme Developer 5 min or less, on damp, towel-dried hair Not currently sold separately at SleekShop
ChromaSilk VIVIDS No developer Direct dye; Pravana says not to mix it with developer 20–30 min at room temperature —

Back to the list

Can you use a different brand of developer?

The brands say no, or at least that they can't promise the result. Wella "cannot guarantee accurate results" with other developers for Koleston Perfect. Goldwell guarantees Topchic's performance only with its own developer lotion. Redken says nothing else can be substituted for Shades EQ Processing Solution, and Joico says not to use any other volume with Lumi10. Developers differ in texture, pH and conditioning ingredients as well as strength, so the same "20 volume" from two brands isn't automatically interchangeable. The safest choice is the developer each line names in the table above.

Back to the list

Can you mix 10 and 30 volume to make 20?

On paper, equal parts of 3% and 9% average to 6%. But brands don't publish this as a method for their permanent lines, so we don't recommend it. Buy the strength the directions call for. If your directions call for 10 volume, buy 10 volume. Wella, for example, sells a Color Charm 10 volume developer.

Back to the list

What happens if you use the wrong ratio?

The ratio controls how much the color lifts, how much pigment it deposits and how well it covers gray. Mixing a 1:1 line at 1:2 dilutes the color, so you can get weaker coverage and a lighter, warmer or patchier result. Mixing a 1:2 line at 1:1 leaves too little developer, which can mean less lift and a darker, heavier result. Measure both parts with a scale or a marked bottle every time, and if you change the amount of color, change the developer to match.

Back to the list

Can you mix two shades from the same line?

Yes, within the same line, and the ratio doesn't change. Add the shades together, then add developer for the total amount of color. For example, Wella's gray-coverage formula for Koleston Perfect is 15 g of a Pure Naturals shade + 45 g of a fashion shade + 60 g of 6% Welloxon Perfect. Watch for exceptions: Koleston Special Blondes mix 1:2, so don't combine them with a 1:1 shade and expect the 1:1 ratio to hold. Don't mix lines or brands together.

Back to the list

Products in this guide

Stock checked November 17, 2026.

Questions people ask

What volume developer should I use?

Use the volume your color line's directions give for your goal. As a starting point: going darker or staying the same level on hair without much gray, 10 vol; covering gray or going about 1 level lighter, 20 vol; going 2–3 levels lighter, 30 vol. 40 vol is mostly for high-lift shades. Some lines have their own low-strength developer for toning (for example Shades EQ Processing Solution or Color Touch Emulsion).

Is 20 volume or 30 volume better?

Neither is better; they do different jobs. 20 volume is the standard for gray coverage and small lifts. 30 volume lightens more (about 2–3 levels) but usually covers gray less well. If you're covering gray, most brands want 20 volume.

What developer goes with Goldwell Topchic?

Goldwell System Cream Developer Lotion, mixed 1:1 for the 2–10 series (30 minutes, or 20 with heat) and 1:2 for the 11 and 12 Special Lift series (45 minutes, or 30 with Goldwell's Open Air heat system).

What developer goes with Wella Koleston Perfect?

Welloxon Perfect creme developer, mixed 1:1 for most shades and 1:2 for Special Blondes. Process 30–40 minutes (15–25 with heat), or 50–60 minutes for Special Blondes (25–35 with heat).

What developer do you use with Wella Color Charm toners like T18?

Color Charm Permanent Liquid Toners (T18, T14 and the rest) mix 1:2 with Color Charm 20 volume developer, for up to 30 minutes on towel-dried, pre-lightened hair. Color Charm Permanent Creme Toners mix 1:2 with Color Charm 10 volume creme developer, for 10–20 minutes.

What developer goes with Redken Shades EQ?

Only Shades EQ Processing Solution (or Redken's Gloss-to-Gel Processing Solution), mixed 1:1, for 20 minutes on dry hair. Redken says no other developer can be substituted.

What is the mixing ratio for Igora Royal?

1:1 with Igora Royal Oil Developer (3%, 6% or 9%) for most shades, including Absolutes. Igora Royal Highlifts 12-series mix 1:2 with 12%. Fashion Lights use 9% or 12% and are for use off the scalp only. Igora Vibrance (the demi line) mixes 1:1 with its own Activator Gel or Lotion.

What is the mixing ratio for Matrix SoColor?

1:1 with Matrix Cream Developer for most SoColor Pre-Bonded shades. Extra Coverage uses 20 volume only. Ultra Blonde mixes 1:2 with 30 or 40 volume. SoColor Sync (demi) mixes 1:1 with 10 volume for up to 20 minutes.

All hair color guides

Sources