Choose & mix

Bleaching Hair at Home: Developer, Mixing Ratios and Every Lightener Compared

Updated November 18, 2026 · SleekShop hair color guide

Bleach, also called lightener, is a powder, cream or clay that you mix with developer to lift color out of your hair. Each brand sets its own mixing ratio, the strongest developer it allows on the scalp and its maximum time. The tables below give all three for every lightener we stock, taken from each brand's own directions.

Before you color: follow the package directions exactly. Wella's and Clairol's lightener warnings say that failing to do so "may result in severe chemical burn." Do the allergy test your lightener calls for (Wella's BlondorPlex: a patch test 48 hours before each application), wear gloves and mix in a well-ventilated room. Never use lightener on eyebrows or eyelashes or on an irritated, sunburned or damaged scalp, and use only the developer strength your lightener allows on the scalp.

What is the best bleach for hair? Every lightener we stock, compared

The best lightener fits your hair and your plan; the biggest number on the tub doesn't decide it. The brands claim 7 to 9+ levels of lift. Some have a bond builder inside, some are made for the scalp, and some are off-scalp only, for foils and balayage. Every fact below comes from the brand.

Lightener comparison: form, bond builder, lift and sizes
Lightener Form Bond builder inside? Most lift the brand claims Sizes we sell
Schwarzkopf BlondMe Premium Lightener 9+ Powder Yes: "Integrated Anti-Metal Bond Protection Technology" Up to 9 levels 1 oz, 15.8 oz
Schwarzkopf BlondMe Clay Lightener Powder that mixes into a clay (with kaolin clay). Off the scalp only Yes: anti-metal bond protection Up to 8 levels 12 oz (Schwarzkopf: 350 g)
Schwarzkopf Igora Vario Blond Super Plus Powder Yes: "Schwarzkopf Bonding Technology" Up to 8 levels 15.8 oz
Wella BlondorPlex Multi Blonde Dust-Free Lightener Dust-free powder Yes: "Bond Builder Technology" (Wella's breakage claim is with the WellaPlex No.2 step) Up to 9 levels 1 oz, 14.1 oz, 28.2 oz
Wella Blondor Multi Blonde Powder Lightener Powder Not stated (has anti-yellow molecules) Up to 7 levels, "even on pre-colored hair" 1 oz, 28.2 oz
Wella Blondor Soft Blonde Cream Lightener Cream, made for on-scalp use Not stated (has lipids) Up to 7 levels 7 oz
Wella Color Charm Powder Lightener Dust-free powder Not stated Up to 7 levels 1.1 oz, 16 oz
Goldwell LightDimensions SilkLift Strong Powder Not stated (optional SilkLift 2in1 Serum) Up to 9 levels 17.6 oz
Goldwell SilkLift Control Ash / Control Pearl Powder with tone control Not stated (Goldwell says its SilkLift 2in1 Serum is mandatory with Control) Up to 7 levels 17.6 oz
L'Oréal Professionnel Blond Studio 8 Bonder Inside Powder Yes: "Bonder inside" Up to 8 levels 17.6 oz
L'Oréal Professionnel Blond Studio 9 Powder Not stated Up to 9 levels 17.6 oz
L'Oréal Professionnel Blond Studio Platinium Plus Paste Not stated Up to 7 levels 17.6 oz
Matrix Light Master Pre-Bonded Powder Yes: "Pre-mixed with Bonder so no additives needed" Up to 8 levels 1.06 oz, 16 oz, 32 oz
Joico Blonde Life Lightening Powder Powder Yes: "Bond-Building Arginine" Up to 9+ levels 16 oz, 32 oz
Clairol Professional BW2+ Extra Strength Lightener Dedusted powder Not stated Up to 9 levels 1 oz, 8 oz, 16 oz, 32 oz
Oligo Blacklight Extra Blonde Dust-free powder Oligo describes "ionic bond technology" that protects the cuticle; its bond protector is a separate add-in Up to 9 levels on natural hair, 8 on color-treated 1 lb, 2 lb
Pravana Pure Light Power Lightener Blue-based powder Not stated Up to 7 levels 1.06 oz packet, 24 oz

"Not stated" means the brand's own pages don't claim a bond builder. It doesn't mean the product is harsher. Lift numbers are each brand's maximum under its own directions. Your result depends on your starting level, your hair's condition and how long you process.

What is the bleach to developer ratio?

There's no single bleach ratio. Each brand sets its own, and many change it by technique. Ratios are written lightener : developer: 1:2 means 1 part powder to 2 parts developer. The most common on-scalp ratio among the lighteners we stock is 1:2, but Pravana uses 1:3, and L'Oréal and BlondMe allow other ratios too. Weigh both parts.

Lightener mixing ratio and developer, by brand
Lightener Ratio (lightener : developer) Developer the brand names (all strengths, on and off the scalp)
Schwarzkopf BlondMe Premium Lightener 9+ 1:1.5 (most lift), 1:2 or 1:2.5 BlondMe Premium Developer 2%, 6% or 9%
Schwarzkopf BlondMe Clay Lightener (off the scalp only) 1:1.5 (thicker) or 1:2 (slightly thinner) BlondMe Premium Developer 6%, 9% or 12%
Schwarzkopf Igora Vario Blond Super Plus 1:2 (30 g + 60 ml) Igora Royal Oil Developer 3%, 6% or 9%
Wella BlondorPlex Multi Blonde 1:1.5 up to 1:2 Welloxon Perfect Crème Developer
Wella Blondor Multi Blonde 1:1.5 up to 1:2 Welloxon Perfect Crème Developer
Wella Blondor Soft Blonde Cream 1:1.5 up to 1:2 Welloxon Perfect 6%, 9% or 12%, or Color Touch Emulsion 1.9% or 4%. On the scalp, Wella says 6% (20 vol) or below
Wella Color Charm Powder Lightener 1:2 on the scalp; 1:1.5 to 1:2 off the scalp. Wella: never 1:1 Color Charm Cream Developer 20 or 40 vol
Goldwell SilkLift Strong 25 g powder + 35 ml developer (Goldwell's "regular amount") SilkLift Conditioning Cream Developer 3%, 6% or 9%
L'Oréal Blond Studio 8 Bonder Inside 1:1 balayage; 1:1.5 foils; 1:2 all-over on the scalp Majicrème Developer 20, 30 or 40 vol
L'Oréal Blond Studio 9 1:1 balayage; 1:1.5 foils; 1:2 or 1:3 all-over (US directions; follow your package insert) Blond Studio 9 Oil Developer only, 20 or 30 vol
L'Oréal Blond Studio Platinium Plus 1:1, 1:2 or 1:3, by the consistency you want Blond Studio Nutri-Developer 20, 30 or 40 vol
Matrix Light Master Pre-Bonded 1:2 on the scalp; 1:1, 1:1.5 or 1:2 off the scalp Matrix Cream Developer
Joico Blonde Life Lightening Powder 1:2 on the scalp; 1:1 or 1:2 off the scalp A Joico developer, such as Veroxide or Blonde Life Coconut Oil Developer
Clairol BW2+ 1:2 by weight; 1:1.5 with 40 vol for maximum lift, off the scalp only (on the scalp, Clairol says no higher than 20 vol) Clairol Professional Cream Developer, such as Pure White Creme Developer 20 vol
Oligo Blacklight Extra Blonde 1:2 on the scalp; 1:1 off the scalp Blacklight Smart Developer 10 to 30 vol
Pravana Pure Light Power 1:3 Pravana Creme Developer, zero lift to 40 vol

These are all the strengths each brand names, not what you can use on your scalp. On the scalp, most of these lighteners allow 20 volume (6%) at most, and BlondMe Clay isn't for the scalp at all. Check the next table before you pick a strength.

Measure by weight, not by eye. Clairol gives BW2+ as a weight ratio, and Matrix's example for Light Master is 15 g of powder with 30 ml of developer. If you use 30 g of a 1:2 lightener, add 60 g of developer. Mix in a non-metal bowl (Wella, Schwarzkopf and L'Oréal all say not to use metal tools) and use the mix straight away.

What developer do you use with bleach?

Use the developer your lightener names, at the lowest volume that gets the lift you need. On the scalp, most lighteners we stock allow 20 volume (6%) at most, and a few allow 30 (L'Oréal Blond Studio 8 and Platinium Plus, Matrix Light Master). 30 and 40 volume are mainly for foils and balayage, where the brand allows them.

Strongest developer each brand allows, on and off the scalp
Lightener Highest developer on the scalp Highest developer off the scalp
Schwarzkopf BlondMe Premium Lightener 9+ 6% / 20 vol 9% / 30 vol (12% only off the scalp with BlondMe Bleach & Tone, per Schwarzkopf's Bleach & Tone mixing table)
Schwarzkopf BlondMe Clay Lightener Not for the scalp 12% / 40 vol
Schwarzkopf Igora Vario Blond Super Plus 6% / 20 vol 9% / 30 vol
Wella BlondorPlex Multi Blonde 6% / 20 vol 12% / 40 vol
Wella Blondor Multi Blonde 6% / 20 vol 12% / 40 vol
Wella Blondor Soft Blonde Cream 6% / 20 vol 12% / 40 vol
Wella Color Charm Powder Lightener 20 vol 40 vol
Goldwell SilkLift Strong 6% / 20 vol Not stated by Goldwell; its developer comes in 3%, 6% and 9% only
L'Oréal Blond Studio 8 Bonder Inside 30 vol (all-over, 1:2) 40 vol for balayage only; 30 vol in foils
L'Oréal Blond Studio 9 20 vol (US directions; follow your package insert) 30 vol, lengths and ends only
L'Oréal Blond Studio Platinium Plus 30 vol 40 vol
Matrix Light Master Pre-Bonded 30 vol 30 vol (Matrix's product page)
Joico Blonde Life Lightening Powder 20 vol 40 vol
Clairol BW2+ 20 vol 40 vol
Oligo Blacklight Extra Blonde 20 vol 30 vol
Pravana Pure Light Power 20 vol 40 vol

Is 20 or 30 developer better for bleach? On the scalp, 20 volume for almost every lightener here, because that's the brand limit. Off the scalp, 30 volume lifts more. Schwarzkopf's BlondMe guide gives up to 6 levels with 6% and up to 9+ with 9% (off-scalp only). The American Academy of Dermatology says that lightening more than three shades "requires higher volumes of peroxide, which causes more hair damage."

Can you use 40 volume developer with bleach?

Only off the scalp, and only with lighteners whose brand allows it. None of the lighteners we stock allows 40 volume on the scalp. Several stop at 30 volume (9%) in their directions: BlondMe Premium Lightener 9+ (unless mixed with Bleach & Tone), Igora Vario Blond Super Plus, L'Oréal Blond Studio 9 and Oligo Extra Blonde.

Goldwell's SilkLift developer only comes up to 9%. The lighteners that do list 40 volume (12%) off the scalp are BlondMe Clay, the three Wella Blondor lighteners, Wella Color Charm, L'Oréal Blond Studio 8 (balayage only) and Platinium Plus, Joico Blonde Life, Clairol BW2+ and Pravana Pure Light. Clairol pairs 40 volume with a 1:1.5 ratio for maximum lift. Matrix's product page caps Light Master Pre-Bonded at 30 volume off the scalp, though its 2023 manual lists 40. Keep any 40-volume mix off your scalp. Wella's lightener warnings say: "Read and follow the directions and instructions carefully. Failure to do so may result in severe chemical burn." Clairol's BW2+ label carries the same chemical-burn warning.

What developer should you use for your starting level?

Count the levels first: your goal level minus your natural starting level (level 5 to level 9 is 4 levels). Then pick the developer from your lightener's own guide; Schwarzkopf publishes one for BlondMe. Wella says most brown hair needs at least two sessions to reach blonde, and from dark brown or black "it may even take a few more."

Not sure of your level? Use our hair color levels guide.

Schwarzkopf's developer guide for BlondMe Premium Lightener 9+
Lift you need Developer Schwarzkopf gives Where you can use it
Up to 3 levels BlondMe Premium Developer 2% / 7 vol On or off the scalp. Schwarzkopf calls this "the most gentle lightening"
Up to 6 levels BlondMe Premium Developer 6% / 20 vol On or off the scalp
Up to 9+ levels BlondMe Premium Developer 9% / 30 vol Off the scalp only

For BlondMe Clay (off-scalp only), Schwarzkopf gives up to 6 levels with 6%, and up to 8 with 9%, or with 12% "depending on the hair structure, density and overall condition."

As hair lightens, it passes through warm stages. Brands make some lighteners and additives for particular starting levels:

Starting level, the warmth you'll see, and products made for that base
Your natural starting level Underlying pigment at this level (Matrix) Made for this starting level (brand's own wording)
1 to 4 (black to medium brown) Dark red-brown to red BlondMe Bleach & Tone Matt: "red-orange tones on bases 1-4". BlondMe Clay (off the scalp only) suits bases 3 to 8
5 to 6 Red-orange to dark orange Bleach & Tone Ash: "orange-yellow tones on bases 5-6". Goldwell SilkLift Control Ash: levels 5 to 7. Control Pearl: levels 6 to 8
7 Orange Bleach & Tone Violet: "yellow tones on base 7". SilkLift Control Ash or Pearl
8 Dark yellow SilkLift Control Pearl (levels 6 to 8); BlondMe Clay (off the scalp only)
9 to 10 Yellow to pale yellow Wella's T18 and T14 toners are for hair pre-lightened to pale yellow. See our toner guide

Wella names some of these stages differently. Its Color Charm Education Book puts pale yellow at level 10, yellow at levels 9 and 8, and gold at levels 7 and 6. Go by your level number.

Bleach & Tone is an additive: Schwarzkopf says to mix it with BlondMe Premium Lightener 9+ or BlondMe Clay and BlondMe Premium Developer, and to take its weight off the developer. Schwarzkopf also says not to apply it on light blonde or previously bleached hair, and "Do not apply to delicate hair and/or a sensitive, damaged or irritated scalp."

Dark and black hair. BlondMe Premium Lightener 9+ is made to lift "even the darkest hair bases," but big lifts take time. Wella's brown-to-blonde guide says "most brown-haired clients will require at least two appointments." It says to space the sessions out, and to wait around six weeks before repeating if the first round falls short. The AAD's tip is to "choose a dye within three shades of your natural color."

How long do you leave bleach on?

Only as long as your lightener's directions allow, and stop sooner once you reach your level. Each brand sets its own maximum, listed below, and no two brands are quite the same. For hair dye, the FDA says never to leave the product on "longer than the directions say," and to keep track of time with a clock or timer.

Check as often as your brand says: every 5 to 10 minutes for Wella Color Charm, Wella Soft Blonde and Clairol BW2+. For BlondMe with 2% developer (Schwarzkopf) and for Oligo on new growth, check every 5 minutes. For its Blondor powders, Wella says "check frequently until desired lightening is achieved."

Maximum processing time and heat, by lightener (brand directions)
Lightener Maximum time Heat
Schwarzkopf BlondMe Premium Lightener 9+ and BlondMe Clay Up to 45 min (Schwarzkopf says 20–45) No artificial heat
Schwarzkopf Igora Vario Blond Super Plus Up to 45 min (Schwarzkopf says 20–45) No artificial heat
Wella BlondorPlex, Blondor Multi Blonde, Blondor Soft Blonde Up to 50 min No heat
Wella Color Charm Powder Lightener Up to 50 min Not stated by Wella: don't add heat
Goldwell SilkLift Strong and Control 45 min Without heat
L'Oréal Blond Studio 9 Up to 50 min No heat
L'Oréal Blond Studio Platinium Plus Up to 50 min Only for the last 10 minutes of balayage
L'Oréal Blond Studio 8 Bonder Inside Read the box insert: L'Oréal doesn't publish a maximum time online Read the box insert
Matrix Light Master Pre-Bonded Up to 50 min, room temperature No heat
Joico Blonde Life Lightening Powder Up to 60 min Without heat
Clairol BW2+ Up to 50 min No heat
Oligo Blacklight Extra Blonde Read the tub label: Oligo doesn't publish a maximum time online. It says to "visually control until desired result" No heat
Pravana Pure Light Power Up to 55 min Not stated by Pravana: don't add heat

Don't use heat to speed things up unless your brand allows it. Schwarzkopf says not to use "artificial heat such as steamers or hood dryers." Don't cover the hair or pile it up while it processes (Matrix: "Do not cover the hair, do not gather the hair in a bun"). Wella's warnings say not to go further if the mix foams, steams or gets hot. If your scalp itches or burns, stop and rinse at once with lukewarm water.

How do you bleach hair at home?

Check your hair's history, do a skin test and a strand test, and mix your lightener with the developer it names, at its ratio. Apply it to dry, unwashed hair, check often, and rinse by the brand's maximum time. Then wait before you dye or tone. Each step below comes from the brands or the FDA.

  1. Check what's on your hair. Wella and Schwarzkopf say not to use their lighteners on hair colored with henna or metallic dyes. If you don't know what's on your hair, ask a colorist.
  2. Do the allergy test your lightener calls for. Wella's US BlondorPlex label says to "conduct hypersensitivity and allergy patch test 48 hours prior to each application." Schwarzkopf's online directions for its BlondMe and Igora Vario lighteners don't describe a patch test, so follow the leaflet in your box. BlondMe Bleach & Tone's label says "a preliminary test according to accompanying directions should first be made." For hair dye, the FDA says to "do a patch test on your skin every time before dyeing your hair." Don't lighten if you've ever reacted after bleaching, highlighting or lightening before (Clairol and Schwarzkopf).
  3. Do a strand test. Wella suggests applying your exact formula to a strand first and using the result as your guide. Matrix's lightener guide says to "always perform a strand test when using a lightener on hair that has been previously sensitized" (chemically treated before).
  4. Don't shampoo right before. Wella and Schwarzkopf say not to shampoo immediately before lightening, and Oligo says to apply to "dry non-shampooed hair." Wella's Color Charm guide says to shampoo a day before if your hair has build-up. The FDA also says not to scratch or brush your scalp for three days before coloring.
  5. Pick the developer. Stay within your lightener's on-scalp limit (table above).
  6. Mix at the brand's ratio, by weight. Use a non-metal bowl, wear gloves and mix in a well-ventilated room. Use the mix straight away and throw away what's left: Wella's Welloxon Perfect label says to "discard any unused mixture."
  7. Apply to dry hair and time it. Take metal clips and pins out first (Schwarzkopf). If your hair is already lightened in places, Schwarzkopf says to avoid overlapping onto it. Check as often as your brand says (see the timing section). Never go past the brand's maximum time, never add heat unless the brand allows it, and don't cover the hair.
  8. Rinse and shampoo. Follow your lightener's directions. If you used a two-step bond system, finish its second step (for example, Wella says to finish every BlondorPlex service with WellaPlex No.2).
  9. Wait before you color or tone. The FDA advises waiting at least 14 days after bleaching before using hair dye, and toner is a hair dye.

What is a bleach bath, and how is it different from regular bleaching?

A bleach bath, or bleach wash, is lightener thinned out, often with shampoo, so it lifts gently, usually to take out old color or brass. Most brands don't publish one. Oligo publishes a lightener, developer and shampoo mix, and Wella a diluted "mild lightener," each lifting up to about 3 levels. Neither calls it a bleach bath.

Gentle-lift recipes published by the brands
Brand recipe What to mix What it's for Lift the brand gives How to use it
Oligo Blacklight "Colour Cleansing" 1 part Blacklight Lightener + 1 part Blacklight Smart Developer 10 vol (3%) or 20 vol (6%) + 1 part Blacklight Repair Shampoo "To clean and lighten hair" Up to 3 levels "Apply to dry hair", then "Visually control until desired result" (Oligo gives no time, so never go past the maximum time on your lightener's label)
Wella Blondor "Mild Lightener Recipe" 1 part Blondor Multi Blonde Powder + 4 parts Welloxon Perfect Pastel 1.9% (6 vol) or Color Touch Emulsion 1.9%. Use Color Touch Emulsion 4% (13 vol) for a stronger result "To remove old color, banding and color over-deposit" Up to 2–3 levels Apply to dry hair, for 50 minutes at most. Then rinse, shampoo and neutralize

The ingredients we stock for these recipes: Oligo's recipe says "Blacklight Lightener", and the Blacklight lightener we stock is Oligo Blacklight Extra Blonde. We also stock Blacklight Smart Developer 20 vol (we don't sell Blacklight Repair Shampoo). Wella Blondor Multi Blonde with Welloxon Perfect Pastel 1.9% or Color Touch Emulsion.

How a bleach bath differs: it's diluted, so it lifts less (2 to 3 levels in these recipes, against 7 to 9+ for full-strength lightener). The brands present it for cleaning out old color and brass rather than for going blonde. It's still lightener. Every safety step on this page applies, including the skin test, gloves, ventilation, and keeping it off brows and lashes. We don't give a shampoo ratio for other brands' lighteners, because those brands don't publish one.

Do you need a bleach with a bond builder?

You don't need one, but many lighteners now have one inside: BlondorPlex, BlondMe, Igora Vario Blond, L'Oréal Blond Studio 8 Bonder Inside, Matrix Light Master Pre-Bonded and Joico Blonde Life. Brands still set developer limits and maximum times for these lighteners, so a bond builder isn't a reason to process longer.

Don't add a second bonder to a lightener that already has one unless the brand says to. Schwarzkopf says "the use of additional bonding systems may compromise performance" with BlondMe. Matrix says that adding a bonding additive to Light Master Pre-Bonded "could affect the lifting action." Wella's BlondorPlex is the exception: it is designed as a two-step system, and Wella says to finish every BlondorPlex service with WellaPlex No.2.

What toner do you use after bleach?

Pick the toner by the color your hair lifted to: violet cancels yellow and blue cancels orange. Our toner guide matches each level and kind of brass to a shade, ratio and time. Our Wella Color Charm toner chart covers T18, T14 and the rest.

The FDA advises waiting at least 14 days after bleaching before using hair dye, and toner is a hair dye. Follow that advice and both packages' directions. If you'd rather lighten and tone in one step, Schwarzkopf's BlondMe Bleach & Tone additive is mixed into the lightener for that.

Is it safe to bleach your hair at home? What the brands and the FDA say

Lightener can cause severe allergic reactions and chemical burns, so the brands print strict warnings. Follow the package directions exactly, do your brand's allergy test, and keep it off your brows, lashes and any irritated or damaged scalp. These are professional products written for trained colorists. For big lifts on dark or previously colored hair, consider a colorist.

Allergy. Schwarzkopf's BlondMe label says the product "can cause severe allergic reactions," and to "open away from face and avoid inhaling contents." A 2014 Wella safety data sheet for a Blondor lightener powder says it "may cause sensitization by inhalation and skin contact." Wella's US BlondorPlex label says to "conduct hypersensitivity and allergy patch test 48 hours prior to each application." Schwarzkopf's online directions for its BlondMe and Igora Vario lighteners don't describe a patch test, so follow the leaflet in your box. BlondMe Bleach & Tone's label says "a preliminary test according to accompanying directions should first be made." For hair dye, the FDA says to "do a patch test on your skin every time before dyeing your hair," and warns that "even if you don't see a reaction to the skin test, it's still possible to have a reaction." Clairol says not to lighten if you have "ever experienced any reaction after bleaching/highlighting the hair." Schwarzkopf says the same of anyone who "has ever experienced any reaction after lightening."

Never on eyebrows or eyelashes. The FDA says: "Keep hair dyes away from your eyes, and do not dye your eyebrows or eyelashes," because "this can hurt your eyes and may even cause blindness." Wella, Schwarzkopf and Clairol all say not to use their lighteners on eyelashes or eyebrows, and Wella and Clairol add "or other parts of the body." If lightener gets in your eyes, take out any contact lenses, rinse your eyes immediately and seek medical advice (Wella). Wella warns it "can cause eye irritation and permanent eye injury."

Scalp. The FDA says not to color hair if your scalp is "irritated, sunburned, or damaged," and not to scratch or brush your scalp for three days before. Wella and Schwarzkopf say not to use their lighteners if you have a facial rash or a "sensitive, irritated and damaged scalp." Use only the developer strength your lightener allows on the scalp. Wella's UK BlondorPlex label says "do not use higher than 20 vol (6%) developer for on-scalp application," and Wella's and Clairol's lightener warnings say that not following the directions "may result in severe chemical burn."

If it burns, stop. Wella's directions: "Do not proceed further if an adverse reaction occurs (e.g., itching, burning or rash or any unexpected reaction). Stop and immediately rinse with lukewarm water. If necessary, seek medical treatment." If the mix foams, steams or gets hot, Wella says not to go further. If you have a reaction, the FDA asks you to tell your healthcare provider and report it to the FDA. Reactions can also start later. Schwarzkopf's BlondMe label says that if, "after use or on the following days," you get skin or scalp itching, a rash, "swelling of eyes/face," blistering or weeping, "seek immediate medical attention and contact the manufacturer." For hair color, the AAD says a rash, redness, swelling, burning or itching after the test means you're having an allergic reaction: "Do not dye your hair and consult your dermatologist for further allergy testing."

Air and dust. Wella says to "mix in a well-ventilated room," to "avoid inhaling product and hold away from face when opening," and to "leave the room" if you have trouble breathing. Schwarzkopf, L'Oréal and Clairol also say to mix or use their lighteners in a well-ventilated place.

Gloves and tools. Wear suitable gloves to mix, apply and rinse (Wella, Schwarzkopf, L'Oréal, Matrix, Clairol and the FDA). Use a non-metal bowl and tools (Wella, Schwarzkopf, L'Oréal, Matrix), and take metal clips and pins out of your hair first (Schwarzkopf). Don't use lightener on hair colored with henna or metallic dyes (Wella, Schwarzkopf).

Heat and time. Never go past the brand's maximum time. Don't add heat unless the brand allows it, and don't cover the hair while it processes. Use the mix straight away. Wella's Welloxon Perfect label says to "use colorant mixture immediately and discard any unused mixture," and "do not leave colorant mixture in a closed bottle (bottle may expand/burst)."

Who shouldn't use it. Clairol's BW2+ label and Wella's UK BlondorPlex label say they are not for anyone under 16. Wella's US label says "product not intended to be used on children" and "keep out of reach of children," and Schwarzkopf says its BlondMe developer is "not to be used for children under the age of 16." Schwarzkopf's Bleach & Tone label says it "is not intended for use on persons under the age of 16." Schwarzkopf's lightener labels also say "Do not use on damaged hair."

Space your services. The FDA advises waiting at least 14 days after bleaching, relaxing or perming before using hair dye. The AAD suggests having only one service at a time: if you also perm or relax, do that two weeks before coloring. Wella says not to perm, relax or straighten the hair "immediately before or after use." Schwarzkopf says to "wait 24 hours between applications" of BlondMe. If the first session falls short, Wella's brown-to-blonde guide suggests waiting around six weeks before you repeat it.

Products in this guide

Stock checked November 18, 2026.

Questions people ask

How much bleach powder do you mix with developer?

Use your lightener's ratio, by weight. At 1:2, mix 1 oz (or 30 g) of powder with 2 oz (60 g) of developer. At 1:1.5, use 1 oz of powder with 1.5 oz of developer. Ratios differ by brand and technique, from 1:1 for some balayage mixes up to 1:3 for Pravana Pure Light and some L'Oréal mixes. The ratio table above lists every lightener we stock.

Will 20 volume developer work with bleach?

Yes. 20 volume (6%) is the strongest developer most lighteners allow on the scalp. Schwarzkopf's guide gives up to 6 levels of lift with BlondMe Premium Lightener 9+ and 6% developer. It lifts less than 30 volume (up to 9+ levels with 9%, off the scalp only, in the same guide). Check as often as your brand says and stay within its maximum time.

Can you bleach wet hair?

The brands say no: apply lightener to dry hair. Oligo says "dry non-shampooed hair," Pravana says "apply to dry hair," and Wella's Color Charm guide says to apply "to unwashed hair" and not to shampoo right before lightening.

Can I bleach my hair again if it didn't lift enough?

Not right away, and the brands' waits differ a lot. Schwarzkopf's BlondMe label says to "wait 24 hours between applications." Wella's brown-to-blonde guide suggests waiting around six weeks before you repeat a session that fell short, and says most brown hair needs at least two sessions. Don't lighten again on an irritated or damaged scalp (FDA, Wella, Schwarzkopf), and Schwarzkopf says not to use its lighteners on damaged hair.

Can I color my hair right after bleaching?

The FDA advises waiting at least 14 days after bleaching before using hair dye, and toner is a hair dye. Salon directions often tone straight after lightening, but at home, follow the FDA advice and the directions on both packages. If your scalp is sore or your hair feels weak, wait.

Which brand of bleach is the strongest?

Going by the brands' claims, Joico Blonde Life claims up to 9+ levels, and Schwarzkopf's guide gives 9+ for BlondMe Premium Lightener 9+ with 9% developer off the scalp. Schwarzkopf (for BlondMe 9+), Wella BlondorPlex, L'Oréal Blond Studio 9, Goldwell SilkLift Strong, Clairol BW2+ and Oligo Blacklight Extra Blonde claim up to 9. "Strongest" isn't the same as best: more lift means more processing, so pick the lift you need.

Can you use high-lift hair color instead of bleach?

Only on natural, uncolored hair, and only for a smaller lift. High-lift color lightens your natural pigment as it deposits tone. Goldwell's color education says oxidative colors "only lift natural pigments, not artificial pigments." Wella says Koleston Perfect Special Blondes lift 4 to 5 levels with 12% developer. Lightener lifts further, and Wella says Blondor Multi Blonde works "even on pre-colored hair."

What's the gentlest way to lighten?

Use the lowest developer that gets your lift. Schwarzkopf says BlondMe Premium Lightener 9+ with 2% (7 vol) developer gives "the most gentle lightening," with up to 3 levels of lift, and to check it every 5 minutes. For removing old color or brass, see the brand bleach-bath recipes above.

All hair color guides

Sources